HP2070 2-Speed Percussion Drill 1010W 110V

The Makita HP2070 2 Speed Percussion Drill 1010W in the 110V Version.

Supplied with:

1 x Side Handle
1 x Depth Stop
1 x Carry Case

The Makita HP2070 2-Speed Percussion Drill with a reversing system prevents the speed reduction of the motor in reverse rotation. There is a mechanical 2-speed, and electronic speed adjusting dial for presetting maximum speed.
The torque limiter prevents damage. The drill stops when the bit hits against reinforcements. It is also fitted with a keyed chuck.

It is supplied with a side handle, depth stop and a carry case.

Specifications:

Input Power: 1,010W.
No Load Speed: 0-1,200/0-2,900/min.
Impact Rate: 0-24,000/0-58,000/bpm.
Capacity: Steel 13mm, Masonry 20mm, Wood 40mm.
Weight: 2.5kg.

Vibration Hammer Drilling: 16 m/sec².
Vibration K Factor: 1.5 m/sec².
Noise Sound Pressure: 99 dB(A).
Noise Sound Power: 110 dB(A).
Noise K Factor: 3 dB(A).